Get enough sleep or face low energy and poor concentration – research

Published: 29 July 2021

At least a third of adults are not getting enough sleep, impacting detrimentally on a range of health processes, including mood, energy and concentration, according to research.

One US survey, conducted by the Centers for Disease Control and Prevention (CDC), found that almost 35 percent of adults are getting less than seven hours of sleep a night, sometimes leading to bad moods, low energy, difficulty in concentrating and a general inability to function adequately.

The survey indicated that sleep deprivation may increase the risk of several chronic health conditions, while other research indicates that sleep-deprived people report an increase in negative moods and poor concentration, focus and alertness.

The US Sleep Foundation says improved sleep may boost both short- and long-term cognitive performance.

SA health expert, Giulia Criscuolo said the current pandemic had upset routines and sleep cycles and the lack of adequate rest was impacting on cognitive abilities and concentration.  “Aim for at least eight hours of restorative sleep a night and take steps to improve sleep quality. Eat healthily, manage stress, exercise daily and try natural support aids for sleep, focus and energy, such as GO2, 100% natural essential oil inhalers which help stimulate the brain's limbic system which guides our emotional responses,” said Criscuolo.

Essential oils are compounds extracted from plants and used for centuries for their therapeutic properties such as supporting calm, sleep, energy and alertness. Inhaling the oils may support the body to respond accordingly, Criscuolo added.

Martin Persson, from GO2 distributors, Stributique, said: “GO2 Inhaler Sticks are a game changer for natural health in SA because they are safe, easy to use and contain high quality, pure essential oils, known for their therapeutic, cosmetic, aromatic and spiritual support”.

Available online at https://beautybuy.co.za/, www.retailbox.co.za and selected Dis-Chem stores.

MAN Energy Solutions Announces Their Topic For The Southern Africa Power Summit Next Month In Cape Town! #SSAPOW19

Published: 20 September 2019

Robin Watson, Managing Director South Africa for MAN Energy Solutions will deliver a keynote presentation next month at #SSAPOW19 and also talk about Man Energy Solutions range of engine and turbine-based power solutions.

The Southern Africa Power Summit will provide a platform to address some key challenges of improving ageing power infrastructure, developing new power infrastructure, renewable power innovations, gas to power technologies, transmission & distribution solutions, more cost effective temporary power solutions and much more.

We will bring together Ministries of Power & Energy, State Power providers, Public – Private partnerships (PPP), Independent Power Producers (IPP’s) and key solution providers to tackle some of the most pressing issues within the African Power industry.

In the Sub Continent region power companies will be looking toward the strategy for increased power capacity: Eskom, ZESCO, Electricidade de Moçambique (EdM), NamPower, TANESCO, Southern African Power Pool, Botswana Power Corporation, SNEL, RNT and many more.

Meet the key decision makers from The Southern Africa Power Industry for 3 days of panel discussions, workshops,1-2-1 business meetings and networking. Contact This email address is being protected from spambots. You need JavaScript enabled to view it. for details to register. 

STEAG #Energy Services confirm as Roundtable Sponsor for #SSAPOW19

Published: 20 September 2019

STEAG GmbH Energy Services confirm as Roundtable Sponsor for the upcoming 5th Annual Southern Africa Power Summit 2019! #SSAPOW19 

“THE 3 PILLARS OF ACHIEVING SUSTAINABLE ENERGY DEVELOPMENT IN SOUTHERN AFRICA – REGULATION  FINANCING & TECHNOLOGY” 

The Southern Africa Power Summit hosted by Vale Media Group, the number 1 Africa Focused B2B events company, will provide a platform to address some key challenges of improving ageing power infrastructure, developing new power infrastructure, renewable power innovations, gas to power technologies, transmission & distribution solutions, more cost effective temporary power solutions and much more.

We will bring together Ministries of Power & Energy, State Power providers, Public – Private partnerships (PPP), Independent Power Producers (IPP’s) and key solution providers to tackle some of the most pressing issues within the African Power industry. In the Sub Continent region power companies will be looking toward the strategy for increased power capacity: Eskom, ZESCO, Electricidade de Moçambique (EdM), NamPower, TANESCO, Southern African Power Pool, Botswana Power Corporation, SNEL, RNT and many more.

29th -31st October 2019, The Vineyard Hotel, Cape Town. 

For more information contact This email address is being protected from spambots. You need JavaScript enabled to view it. or go to www.ssapower.com

#SSAPOW19: Jeannot Boussougouth, Executive Vice President: #Power & #Infrastructure, Standard Bank Group joins the VIP delegation

Published: 30 July 2019

Jeannot Boussougouth, Executive Vice President: Power & Infrastructure, Standard Bank Group joins the VIP delegation for the 5th Annual Southern #Africa #Power Summit 2019! #SSAPOW19

The SSA Power Summit hosted by Vale Media Group, the number 1 Africa Focused B2B events company, will provide a platform to address some key challenges of improving aging power infrastructure, developing new power infrastructure, renewable power innovations, gas to power technologies, transmission & distribution solutions, more cost effective temporary power solutions and much more.

We will bring together Ministries of Power & Energy, State Power providers, Public – Private partnerships (PPP), Independent Power Producers (IPP’s) and key solution providers to tackle some of the most pressing issues within the African Power industry. In the Sub Continent region power companies will be looking toward the strategy for increased power capacity: Eskom, ZESCO, Electricidade de Moçambique (EdM), NamPower, TANESCO, Southern African Power Pool, Botswana Power Corporation, SNEL, RNT and many more.

African Utility Week returns to Cape Town in May with latest updates and success stories in power, energy and water

Published: 01 February 2019

Mother City to welcome back 10 000+ energy and water professionals

“The African Utility Week conference has a longstanding reputation of producing innovative, topical and high-level content, discussion and engagement” says event director Evan Schiff, adding: “the 19th edition of the event from 14-16 May in Cape Town this year will, once again, not disappoint.”

The new co-location of POWERGEN Africa in 2019 will add an expanded focus on generation, including renewables, off grid, fossil fuels and nuclear, while still concentrating on transmission, distribution, metering, new technologies including storage, mini grids, micro grids, IOT and ICT systems, as well as water.

Along with multiple side events and numerous networking functions the event boasts a five track strategic conference with over 300 expert speakers. An extensive Knowledge Hub programme that is CPD accredited and free to attend, offers hands-on presentations taking place in defined spaces on the exhibition floor. These discuss practical, day-to-day technical topics, best practices and product solutions that businesses, large power users and utilities can implement in their daily operations

.Keynote speakers confirmed so far are:

- Dr Mark Swilling
, Programme Coordinator of the Sustainable Development Programme in the School of Public Leadership; the Academic Director of the Sustainability Institute; and the Co-Director of the Stellenbosch Centre for Complex Systems in Transition.

- Prof Anton Eberhard, who the directs Managing Infrastructure Investment Reform Regulation In Africa (MIRA) at the Graduate School of Business at the University of Cape Town. He is also chairing a team appointed by South African President Cyril Ramaphosa to advise on turning Eskom around and restructuring the power sector.

African Utility Week connects experts from the entire power, energy and water value chain, including:

·         BEHAVIOUR TRANSFORMATION: “We are inspired to ensure quality utilities are provided to Africa to give the individual the opportunity to independently manage their use of power and water, ensuring a sustainable future.”
- Jodie Sherwin Hill, Executive Director, Jomat Investments Pty (Ltd), and African Utility Week Advisory Board member.

·         WATER: “We need for water sectorial practitioners to join hands and force Governments to put the sector in the position where it rightly belongs and that is at the front of all sectors. This would allow the sector to enjoy priority in terms of investments, which was required yesteryear across Africa.”
- Gift Sageme, CEO at Malawi’s Central Region Water Board in Malawi and AUW Advisory Board member.

·         HYDROPOWER: “We are contracted by New Africa Power (Mauritius) to develop a 5 project 70MW portfolio of hydro power plants in Zambia. These projects are prepared for qualification under the KfW (German) GETFiT programme. This is a significant step for us and it is exciting to have been able to move beyond South Africa, take a step up in scale and to drive the innovation around our third generation of hydro IPPs.”
- Anton-Louis Olivier, MD, REH, African Utility Week and POWERGEN Africa Advisory Board member and previous winner of an AUW Industry Award for the top Small-Scale Sustainable Energy Project (under 5MW).

·         MINI GRIDS: “We have a very exciting project called ViDA (Village Data Analytics) around using satellites to streamline and optimise much of the mini-grid development cycle.”
- Dr Sam Duby, Africa Director, TFE Consulting and panellist at the upcoming African Utility Week and POWERGEN Africa in the Energy Revolution Africa session on “Driving demand and facilitate access to financing in rural areas”.

·         SMART ENERGY AND WATER: “We are presently implementing a pilot smart electric water heating project on our CSIR campus in Pretoria, assessing the potential energy savings and benefits in creating a flexible load utilising the considerable energy storage inherent with hot cylinder water heating.”
- Dr Clinton Carter-Brown, Head: Energy Centre, CSIR and AUW Advisory Board member.

·         WATER: “Cape Town is a good example that Africa has started to face the effects of climate change by investigating alternative water resources and minimizing the loss of non-revenue water and general water use.”
- Jan Kürstein, Hydrogeologist and Senior Consultant Water and Natural Resources at Rambøll in Denmark and speaker at the upcoming African Utility Week and POWERGEN Africa in Cape Town in May.

·         TECHNOLOGY: “At Dromex we see African Utility Week as a point of unity for the African energy sector and an invaluable connection point for innovation and technology within the industry”
- Stel Stylianou, CEO of Dromex, platinum sponsors.

International pavilions
Apart from the official U.S. country pavilion at African Utility Week and POWERGEN Africa showcasing specialised technology and services for the utility, metering, renewable and water industries, country pavilions from Canada, China, Denmark, France, Germany, India and Poland have also already confirmed their presence at the 3-day event in May.

Industry support
A multi-award-winning conference and exhibition, African Utility Week and POWERGEN Africa has already secured early support from industry stalwarts including Conlog, Dromex, Landis+Gyr, Sumitomo and Utility Systems as platinum sponsors and Aberdare and Sulzer as gold sponsors.

The sixth edition of the annual African Power, Energy & Water Industry Awards also returns to celebrate pioneering utilities, projects and people in the energy and water industry on the continent during 2018/2019.

CEO Forum
The Utility CEO Forum is an exclusive, by invitation only, gathering of regional utility CEOs within the power and energy sector providing a unique, safe space for discussion and debate the modern day challenges of their roles in running African utilities in a fast developing market with high political expectations and low returns within aging or no infrastructure. Confirmed industry expert and technology partners for this strategic gathering are Conlog, Eaton, Nyamezela, Ontec, Oracle and Steinmüller.

African Utility Week and the co-located POWERGEN Africa is the flagship energy event organised by Spintelligent, a multi-award-winning Cape Town-based exhibition and conference producer across the continent in the energy, infrastructure, mining, real estate and agriculture sectors. Other well-known events by Spintelligent include Future Energy East Africa, Future Energy Nigeria, the Utility CEO Forums, Agritech Expo Zambia, Nigeria Mining Week and DRC Mining Week. Spintelligent is part of the UK-based Clarion Events Group and African Utility Week and POWERGEN Africa form part of Clarion Energy, which runs over 40 events that cover the oil, gas, power and energy sectors, making it one of Clarion Events’ largest portfolios.

Dates for African Utility Week and POWERGEN Africa:
Conference and expo: 14-16 May 2019
Site visits: 17 May 2019
Location: CTICC, Cape Town, South Africa

Website: http://www.african-utility-week.com 
Twitter: https://twitter.com/AfricaUtilities    #AUW2019  
Linkedin: African Utility Week

Contact:
Senior communications manager:  Annemarie Roodbol
Telephone:  +27 21 700 3558
Mobile:  +27 82 562 7844
Email:  This email address is being protected from spambots. You need JavaScript enabled to view it. 

Energy expert Ted Blom on explosive energy week in South Africa: “Cape Town needs to cut a deal with Eskom for more affordable desalination”

Published: 26 January 2018

Independent energy expert Ted Blom, speaker and advisory board member at African Utility Week in Cape Town in May shares his views on several developments this week in the energy sector including the appointment of the new Eskom board, appearance of two Eskom executives before the Parliamentary enquiry, Brian Molefe’s court judgement, Deputy President Cyril Ramaphosa’s announcement about nuclear power and the Cape Town water crisis. The interview was done by ESI Africa editor Nicolette Pombo-Van Zyl:

Click here for the full interview with Ted Blom.  

Award-winning energy platform The 18th annual African Utility Week will gather over 7000 decision makers from more than 80 countries to discuss the challenges, solutions and successes in the power, energy and water sectors on the continent. Along with multiple side events and numerous networking functions the event also boasts a seven track conference with over 300 expert speakers. The conference programme will address the latest challenges, developments and opportunities in the power and water sectors: ranging from generation, T&D, metering, technology and water.

The African Utility Week expo offers an extensive technical workshop programme that are CPD accredited, free to attend, hands-on presentations that take place in defined spaces on the exhibition floor. They discuss practical, day-to-day technical topics, best practices and product solutions that businesses, large power users and utilities can implement in their daily operations.

Industry support
Already the event has secured support from leading industry players including Landis+Gyr, Hexing South Africa as platinum sponsors while water expert company Sensus is a gold sponsor. African Utility Week is the flagship energy event organised by the multi-award winning Spintelligent, leading Cape Town-based trade exhibition and conference organiser, and part of Clarion Events Ltd, based in the UK. Other well-known energy events by Spintelligent are Future Energy Nigeria and Future Energy East Africa.

In 2017, African Utility Week was named the joint winner for the AAXO Award for Best Trade Exhibition 6001-12000 sqm category (with the World Travel Market). Co-located to African Utility Week is another AAXO award winner for best confex, the African Real Estate & Infrastructure Summit, an international platform that brings together the full spectrum of the African real estate and infrastructure sectors.

Dates for African Utility Week:
Conference and expo: 15-17 May 2018
Awards gala dinner:  16 May 2018
Site visits: 18 May 2018
Location: CTICC, Cape Town, South Africa

Website: http://www.african-utility-week.com & www.african-real-estate-summit.com   
Twitter: https://twitter.com/AfricaUtilities   #AUW2018 
Linkedin: African Utility Week

Contact:
Senior communications manager:  Annemarie Roodbol
Telephone:  +27 21 700 3558
Mobile:  +27 82 562 7844
Email:  This email address is being protected from spambots. You need JavaScript enabled to view it.

Energy expert and African Utility Week speaker Ted Blom: “Distributed generation will slice electricity costs by up to 90%”

Published: 12 January 2018

African Utility Week returns to Cape Town in May

Energy expert Ted Blom believes distributed generation will slice electricity costs by up to 90% for the average household.

Blom is a speaker and advisory board member of the 18th African Utility Week that is taking place from 15-17 May in Cape Town, South Africa.

In the run-up to the event, he says in an interview that “South Africa and the world is at the precipice of revolutionary developments in energy generation and distribution, and the next 5 -10 years will render such dramatic changes that today's energy supply chain will not be recognisable, especially with the advent of distributed generation, which in many instances will kill off centralised ‘bulk’ generation and distribution. I believe this move will slice electricity costs by up to 90% for the average household, and be a boom industry for participants in the energy revolution, with concomitant radical improvements in standards of living.”

Parliamentary investigation into Eskom
Last year, the independent energy expert also testified before the South African Parliament’s inquiry into Eskom’s governance: “the Parliamentary Energy subcommittee investigation is a refreshing attempt to decipher what has gone wrong at Eskom since it was ‘commercialised’ in 2001. However, any results will only highlight that prosecution and clean-ups are long overdue, as the committee is powerless to take punitive action against wrongdoers.”

Blom also conducted forensic reviews on the Medupi, Ingula and Kusile power station contracts, “but that work is far from complete and dramatically short of resources. Another milestone is the completion of the legal preparatory work to have the first Tegeta coal supply agreement terminated, but again the action has been suspended for unknown reasons. The other two Tegeta coal supply agreements should also be terminated, but it seems South Africans do not have the political staying power to exercise their rights, with the result that Tegeta has managed to get Eskom to further increase coal supply prices, beyond the already outrageous prices- which eventually feed into new higher electricity prices. So while we appear to be winning on the ‘small stage’, we are falling further behind on the ‘Big Stage’".

“Nuclear deal will be pushed through”
With regards to the pending decision on the nuclear deal, Ted Blom says: “I am convinced that the nuclear deal will be pushed through the moment South African citizens take their ‘eye off the ball’. Zuma's government has already confirmed that it is beholden to the Russian deal, and their delivery of those contracts to Russia is allegedly behind. So expect renewed vigour from Eskom and the Department of Energy to bulldoze these through.”

The full interview with Ted Blom can be read here: http://www.african-utility-week.com/TedBlom-interview African Utility Week endeavours to provide a platform for dialogue in the industry and the views and opinions of event speakers and advisory board members do not necessarily reflect the views or position of the organisers.

Award-winning energy platform
The 18th annual African Utility Week will gather over 7000 decision makers from more than 80 countries to discuss the challenges, solutions and successes in the power, energy and water sectors on the continent. Along with multiple side events and numerous networking functions the event also boasts a seven track conference with over 300 expert speakers. The conference programme will address the latest challenges, developments and opportunities in the power and water sectors: ranging from generation, T&D, metering, technology and water.

The African Utility Week expo offers an extensive technical workshop programme that are CPD accredited, free to attend, hands-on presentations that take place in defined spaces on the exhibition floor. They discuss practical, day-to-day technical topics, best practices and product solutions that businesses, large power users and utilities can implement in their daily operations.

Industry support
Already the event has secured support from leading industry players including Landis+Gyr, Hexing South Africa as platinum sponsors while water expert company Sensus is a gold sponsor.

African Utility Week is the flagship energy event organised by the multi-award winning Spintelligent, leading Cape Town-based trade exhibition and conference organiser, and part of Clarion Events Ltd, based in the UK. Other well-known energy events by Spintelligent are Future Energy Nigeria and Future Energy East Africa. 

In 2017, African Utility Week was named the joint winner for the AAXO Award for Best Trade Exhibition 6001-12000 sqm category (with the World Travel Market). Co-located to African Utility Week is another AAXO award winner for best confex, the African Real Estate & Infrastructure Summit, an international platform that brings together the full spectrum of the African real estate and infrastructure sectors.

Dates for African Utility Week:
Conference and expo: 15-17 May 2018
Awards gala dinner:  16 May 2018
Site visits: 18 May 2018
Location: CTICC, Cape Town, South Africa

Website: http://www.african-utility-week.com & www.african-real-estate-summit.com    
Twitter: https://twitter.com/AfricaUtilities   #AUW2018  
Linkedin: African Utility Week

Contact: Senior communications manager:  Annemarie Roodbol
Telephone:  +27 21 700 3558
Mobile:  +27 82 562 7844
Email:  This email address is being protected from spambots. You need JavaScript enabled to view it.

RS Components extends RS Pro portfolio with IP50- and IP65-rated AC inverter drives and accessories

Published: 30 August 2017

Easy-to-use RS Pro range of AC inverters and switches for induction motors ideal for processing and infrastructure industries 

Johannesburg, South Africa, 30 August, 2017 - RS Components (RS), the trading brand of Electrocomponents plc (LSE:ECM), the global distributor for engineers, is expanding its high-quality RS Pro series of products with a large range of simple-to-install and easy-to-use AC inverters.

Complementing the wide range of AC inverters available from RS, the RSAC, RSMK, RSMA and RSDA series of devices are ideal for AC motor-control applications required by maintenance engineers and machine builders in processing and infrastructure industries. Designed for use with single-phase and three-phase AC induction motors across a wide range of power ratings, the RS Pro series comprises 17 AC inverter drives with the majority being IP65 rated (wash down), and the two models in the RSMK series rated to IP50.

The devices are ideal for situations where a robust and sleek design is necessary, and can be used in various applications including conveyors, HVAC and pumps. Available in epoxy die-cast-aluminium cases in two colours - rugged grey, and a white version that is FDA approved for use in food processing - the units offer easy operation with either simple or no programming required.

The high-quality and high-reliability RSDA series inverters, for example, offer power ratings from 0.75 to 2.25kW and feature common sense programming (CSP) to organise parameters into easy to understand intuitive groups. Devices in the range also include features such as Modbus communications protocol compatibility, programmable four-digit displays, status indicator LEDs and multi-function keypads. In addition, pricing is highly competitive and compares well to fully featured digital drives that require difficult programming and/or are provided in less robust plastic cases. 

Also available is a series of highly reliable switches for use with a selection of RS Pro inverter drives. The RSACDC power on/off switch, for example, is designed for use with the RSAC-24D inverter; the switch kit can be installed on the front cover of a drive to provide a positive AC-line disconnect.  The RS Pro range of AC inverter drives and accessory switches is now available from RS.

 -- Ends -- 

About RS Components 

RS Components is the market leader in the high service level distribution of electrical, electronic, mechanical, tools and industrial products. Operating in 26 countries whilst serving a further 100 through third-party distributors, RS serves every sector of industry in the procurement of their products relating to maintenance, repair, operations, low volume production, research and development.   

With over 500 000 products across 2500 leading brands, the company is committed to ensuring that their 1,5 million customers have fast access to a broad, as well as deep range, of products and technologies, all under one roof. RS’s customers, whether ordering single or multiple items, experience a quick, easy, secure, painless and cost effective process. 

The RS catalogue, available at za.rs-online.com, offers full colour pictures with extensive clear product specifications.  Free access to thousands of datasheets ensures the correct product choice. Order placement is easily facilitated through za.rs-online.com, the call centre, e-mail, fax and trade counter.  Locally held stock is delivered to customers within 24 hours, and products held internationally, within four to six working days.    

It is proven that departments traditionally spend 80% of their time sourcing products that account for only 20% of their total procurement spend. RS is focussed on reducing the customers “total cost of product ownership” by reducing the need to make multiple calls to various companies to source products, reducing supplier related administration and allowing for the amalgamation as well as consolidation of supplier bases.  Through this process, procurement efficiency is improved and time is freed up to concentrate on the more important business decisions. 

For more information, please visit the website at za.rs-online.com  

Press Office
Le-andra Olivier
PR and Communications Specialist
RS Components South Africa
This email address is being protected from spambots. You need JavaScript enabled to view it.
+27 11 691 9345 

Further information is available via these links

Relevant Links

RSPro
RS Components South Africa
www.electrocomponents.com
DesignSpark Magazine - http://www.designspark.com 

Further information is available via these links

  • Twitter: @RSComponents; @alliedelec; @designsparkRSRS Components on
  • Linkedinhttp://www.linkedin.com/company/rs-components 

Relevant Links

RS Components announces availability of two series of high-performance capacitors from Panasonic

Published: 27 June 2017

New ranges include aluminium electrolytic devices offering better ripple and capacitance characteristics and EDLC wound radial-lead units delivering longer life for auxiliary power applications 

Johannesburg, South Africa, 27 June, 2017 - RS Components (RS), the trading brand of Electrocomponents plc (LSE:ECM), the global distributor for engineers, has announced availability of two new series of high-performance electrolytic capacitors manufactured by Panasonic. Offering excellent characteristics for a wide variety of applications, the V-TC and V-TCU series of aluminium electrolytic capacitors are specialised miniaturised components offering ripple current and high capacitance.  

The V-TC and V-TCU series are based on the proven V-TP series from Panasonic, but benefit from 1.2 to 1.5 times higher ripple current capabilities at +125°C. In addition, the V-TCU parts also offer 1.2 to 2.2 times larger capacitance values, ranging from 220 up to 680µF, while also downsizing by one aluminium-can size, for example from G to F size or from F to D8. The surface-mount capacitors feature a footprint ranging from 6.3 x 7.7mm up to 10 x 10.2mm, and typical lifetimes of 2000 hours for smaller can sizes and 3000 hours for larger devices. 

The HL series electric double layer capacitors (EDLC) are radial components that come in a variety of capacitances ranging from 2.5F to 100F. The components are ideal for applications that require large discharge currents including backup power supplies for servers and storage devices, auxiliary power supplies for solar-powered products such as street lighting, and driver-assist applications for actuators in a variety of markets.  

The HL series capacitors offer low resistance combined with guaranteed long life over a wide temperature range from –40°C to +65°C. They are wound radial-lead devices, which can achieve far greater capacitance compared to aluminium electrolytic capacitors – by a factor of up to 1000 times more.

They also deliver superior charge/discharge performance compared with secondary batteries, offering rapid charge and discharge over more than 500,000 cycles, as well as offering exceptional ageing characteristics leading to lifetimes of over a decade. The V-TC/U and HL series are now available from RS.

About RS Components 

RS Components is the market leader in the high service level distribution of electrical, electronic, mechanical, tools and industrial products. Operating in 26 countries whilst serving a further 100 through third-party distributors, RS serves every sector of industry in the procurement of their products relating to maintenance, repair, operations, low volume production, research and development.   

With over 500 000 products across 2500 leading brands, the company is committed to ensuring that their 1,5 million customers have fast access to a broad, as well as deep range, of products and technologies, all under one roof. RS’s customers, whether ordering single or multiple items, experience a quick, easy, secure, painless and cost effective process.  The RS catalogue, available at za.rs-online.com, offers full colour pictures with extensive clear product specifications. 

Free access to thousands of datasheets ensures the correct product choice.  Order placement is easily facilitated through za.rs-online.com, the call centre, e-mail, fax and trade counter.  Locally held stock is delivered to customers within 24 hours, and products held internationally, within four to six working days.    

It is proven that departments traditionally spend 80% of their time sourcing products that account for only 20% of their total procurement spend. RS is focussed on reducing the customers “total cost of product ownership” by reducing the need to make multiple calls to various companies to source products, reducing supplier related administration and allowing for the amalgamation as well as consolidation of supplier bases. 

Through this process, procurement efficiency is improved and time is freed up to concentrate on the more important business decisions.  For more information, please visit the website at za.rs-online.com 

Press Office:                                                                       

Le-andra Olivier
PR and Communications Specialist
RS Components South Africa
This email address is being protected from spambots. You need JavaScript enabled to view it.
+27 11 691 9345 

Further information is available via these links:

Relevant Links:

RSPro

  • RS Components South Africawww.electrocomponents.com
  • DesignSpark Magazine - http://www.designspark.com 

RS Components introduces Schneider contactor series delivering reduced energy consumption in industrial machine and electrical panel control applications

Published: 22 June 2017

AC/DC coil TeSys D Green contactors offer backward compatibility with current TeSys D accessories and support products 

Johannesburg, South Africa, 22 June, 2017 - RS Components (RS), the trading brand of Electrocomponents plc (LSE:ECM), the global distributor for engineers, has introduced a new series of AC/DC coil compatible contactors from Schneider Electric.

Schneider has upgraded its TeSys D range with the TeSys D Green range that features lower energy consumption and AC/DC coils, meaning every coil can be energised with either AC or DC current.  Making it easy for customers to upgrade and gain the improved energy efficiencies, the new range is backward compatible with all current TeSys D accessories and support products and offers consistent low-energy contactors that handle 9 to 80A, and cover control voltages from 24 to 500V AC or DC.  

Designed to take up less space in machines and electrical cabinets, the range offers a number of advantages. For example, low control current leads to lower energy consumption with a reduced coil power of just 0.5W at 24V DC, making a major contribution to the energy efficiency of a machine.

In addition, a special contactor product that handles 40 to 65A and can connect directly to PLC control, as the device can be driven by a common 24V DC / 500mA static output, means that a relay interface is no longer required.  

Meeting the SEMI F47 standard, the range offers higher resistance to voltage surges and grid disruptions to provider higher uptime. The contactors also offer reduced contact bounce as the devices retain the same high resistance to shock and vibration as the TeSys D range. 

Other advantages include a constant closing and opening time, regardless of voltage fluctuation, delivering reliable repetitive actuation. Also, when maintenance is required one TeSys D Green can replace many standard contactors. The Schneider Electric TeSys D Green is now available from RS. Further information on plant maintenance solutions available from RS can be found here: http://smarturl.it/plant-maintenance. 

 -Ends-  

About RS Components 

RS Components is the market leader in the high service level distribution of electrical, electronic, mechanical, tools and industrial products. Operating in 26 countries whilst serving a further 100 through third-party distributors, RS serves every sector of industry in the procurement of their products relating to maintenance, repair, operations, low volume production, research and development.   

With over 500 000 products across 2500 leading brands, the company is committed to ensuring that their 1,5 million customers have fast access to a broad, as well as deep range, of products and technologies, all under one roof. RS’s customers, whether ordering single or multiple items, experience a quick, easy, secure, painless and cost effective process.  The RS catalogue, available at za.rs-online.com, offers full colour pictures with extensive clear product specifications. 

Free access to thousands of datasheets ensures the correct product choice.  Order placement is easily facilitated through za.rs-online.com, the call centre, e-mail, fax and trade counter.  Locally held stock is delivered to customers within 24 hours, and products held internationally, within four to six working days.    

It is proven that departments traditionally spend 80% of their time sourcing products that account for only 20% of their total procurement spend. RS is focussed on reducing the customers “total cost of product ownership” by reducing the need to make multiple calls to various companies to source products, reducing supplier related administration and allowing for the amalgamation as well as consolidation of supplier bases. 

Through this process, procurement efficiency is improved and time is freed up to concentrate on the more important business decisions. 

For more information, please visit the website at za.rs-online.com 

Press Office:       

Le-andra Olivier
PR and Communication Specialist
RS Components South Africa
This email address is being protected from spambots. You need JavaScript enabled to view it.
+27 11 691 9345 

Further information is available via these links:

Relevant Links:

RSPro
RS Components South Africa
www.electrocomponents.com
DesignSpark Magazine - http://www.designspark.com

Page 1 of 2